Like the larger MEDVE TM series, the ROKA's spindle moves around the work piece at speeds of up to 800 inches per minute with a spindle speed of 3000 rpm. Other similar types of vertical gantry milling centers will offer maximum load ratings on their table, but with the ROKA, 30,000 plus lbs. can easily be accomodated. Cast iron construction for rigidity and finite element analyzed for optimum casting performance.
| MACHINE CAPACITY |
|
|---|---|
| Clearance Between Walls |
55.0 inches / 1400 mm |
| Clearance Under Spindle |
45.75 inches / 1162 mm |
| Table Width |
45.0 inches / 1143 mm |
| Table Length |
90.0 inches / 2286 mm |
| T-Slot Size |
ANSI/ASME B5.1 M-1985, R1992 5/8 inch T-Bolt Size |
| MACHINE TRAVEL |
|
| X Axis (Longitudinal) |
100.0 inches / 2540 mm |
| Y Axis (Transversal) |
45.0 inches / 1143 mm |
| Z Axis (Vertical) |
31.0 inches / 787 mm |
| FEED RATES |
|
| Rapid X, Y and Z |
800 ipm / 20320 mm/mn |
| Working X, Y and Z |
0.01 to 800 ipm / 0.254 to 20320 mm/mn |
| SPINDLE DESCRIPTION |
|
| Power |
37 HP / 28 kW |
| Taper |
CAT 40 |
| Speed |
0 - 7500 rpm |
| SPINDLE DESCRIPTION |
|
| Travel |
14.0 inches / 355 mm |
| Rapid Feed Rate |
750 ipm / 19050 mm/mn |
| Working Feed Rate |
0.01 to 750 ipm / 0.254 to 19050 mm/mn |
| Power |
37 HP / 28 kW |
| Taper |
CAT 40 |
| Speed |
0 - 3000 rpm |
| REKO MACHINE BUILDERS INC. RESERVES THE RIGHT TO CHANGE ANY OF THE ABOVE SPECIFICATIONS AT ANY TIME WITHOUT ANY CONSENT. | |
